and 
CANBus GNSS Master
Add CAN Bus functionality (classic or NMEA2000) without programming, just with a few configuration clicks. Compatible with all ArduSimple boards with onboard XBee socket.
 | 2 years worldwide warranty | |
| We ship from Spain. Expected delivery to : | |
| This product has quantity discounts available: | |
| <50 units | 156,00€ | |
| >=50 units | Contact us for special pricing | |
| >500 units | Contact us for special pricing | |
| Got any questions? Contact us! - a real human (not AI) will answer in <24 hours! | |
With ArduSimple CANBus GNSS Master, you will be able to add CAN Bus functionality (classic or NMEA2000) to any device with XBee socket or serial port: RTK receiver, sensor, Arduino, or any other embedded platform.
Without any programming involved, and simply using a configuration tool, CANBus GNSS Master can be used as:
- Push GNSS data into the CANBus
- Read data from the CANBus
Check the product User Guide to use the device as classic CANBus with DBC file or as NMEA2000 device.
Contact us if you are interested in DroneCAN compatibility or have specific needs.
Good to know:
– Compatible with NMEA2000 and SAE J1939
– Compatible with all ArduSimple products with XBee socket
– Compatible with all NMEA2000 compliant equipment manufacturers (Garmin, Raymarine, Furuno, Lowrance, …)
Includes:
– CANBus GNSS Master
– USB-C Carrier Board for XBee Plugins
– USB to USB-C cable
– USB to MicroUSB cable
– Terminal resistor (optionally enabled/disabed with a jumper)
- UART
- RS232 (requires accessory)
- CAN 2.0A and B
- Bitrate up to 1 Mbit/s
- Support for standard 11-bit and extended 29-bit frame identifiers
- Voltage supply (VCC): 3.0 - 3.6V
- Power consumption: 150mA typ
- UART voltage: same as VCC
