Ethernet NTRIP Master

With ArduSimple Ethernet NTRIP Master, you will be able to add Ethernet RJ-45 functionality to any device with XBee socket or serial port: RTK receiver, sensor, Arduino, or any other embedded platform).

Without any programming involved, and simply using a configuration tool, Ethernet NTRIP Master can be used as:

• NTRIP Client (to get corrections from your preferred correction service)
• NTRIP Server v1 and v2 (to send your base corrections to a NTRIP caster like RTK2go.com or CentipedeRTK)
• TCP socket client (to send position or any other message to your server)
• PointPerfect Client (This product has free RTK-SSR corrections until 31/12/2023. Later if you want you can get a subscription starting at only $3.90 for 60 hours)
• TCP/UDP server (to manage your receiver from a remote location)

You can learn everything about this product in the Ethernet NTRIP Master User Guide.

Good to know:
– Default configuration is at 115’200bps
– Compatible with all simpleGNSS, simpleRTK2B and simpleRTK3B series boards
– Compatible with u-blox Thingstream PointPerfect augmentation service
– This product has free corrections until 31/12/2023
– PointPerfect compatible for simpleRTK2B receivers (not simpleRTK3B)
– Bulk pricing starting 50 units