and 
Communication plugins
select plugin group that matches your project
to a Rover up to 50 km away
See more
Connect to nearby NTRIP service
using 2G/3G/4H, Wi-Fi, Ethernet, etc
See more
Add extra connectivity: CANBus,
RS232, logging, NME2000, etc
See more
to third-party equipment
embedded computer or receiver
See more
Radio links
Transfer RTK corrections from base to rover without internet
If you don’t have access to an online RTK correction service (NTRIP), you can build you own base station with one of our boards and connect your base and rover wirelessly via right radio link:
- Up to 10km
- Multirover functionality
- Variants for Europe, North America and APAC
- Up to 50km
- Multirover functionality
- Variants for North America and Australia
- Up to 1km
- Point-to-point communication
- 2.4GHz global solution
Internet and NTRIP plugins
Ideal if you already have an RTK correction service nearby.
If you already have access to an RTK correction service (NTRIP caster), just connect your rover to a PC or use one of our plugins for quick setup. Works with any ArduSimple board or any device with an XBee socket if you want to add these communication interfaces.
- Serial bridge to 4G/3G/2G
- NTRIP client/server
- TCP/UDP client
- 4G/3G/2G connectivity
- PointPerfect client
- Bluetooth 2.0 serial port (SPS)
- Use your favorite app in your phone, tablet or PC wirelessly
- Serial bridge to Ethernet
- NTRIP client/server
- TCP/UDP client/server
- 10/100 Base-T up to 100 meters
- PointPerfect client
Connect to your iOS or Android device via classic Bluetooth (BT) or Bluetooth low energy (BLE)
- Serial bridge to WiFi
- NTRIP client/server/caster
- TCP/UDP client/server
- 2.4Ghz WiFi
Industrial interfaces plugins
Expand your board’s connectivity to match any system.
CANBus-to-UART for integrating RTK with CAN systems.
- Log data directly to microSD card
- Ideal for offline applications
- Serial bridge to Ethernet
- NTRIP client/server
- TCP/UDP client/server
- 10/100 Base-T up to 100 meters
- PointPerfect client
Plugins for connection to third-party equipment
Easily connect any ArduSimple communication plugin to third-party equipment
Carrier boards include an XBee socket to host any ArduSimple communication interface: radio, NTRIP, Bluetooth, Wi-Fi, etc. and then output it to your equipment via the chosen connector.
Use any communication plugin with third-party GNSS receivers with RS232 port
Connect any communication plugin to Pixhawk autopilot
Connect any communication plugin to your PC, laptop or any platform with USB
Add plugins to any board with Xbee
Connect any communication plugin to your single board computer with Xbee socket.
Do you need more details?
Do you know more or less what you want but you are missing this extra detail to decide which accessory or starter kit you need? Check out our RTK Explained page where you will find all the possible combinations.
