simpleRTK2B – Basic Starter Kit

SKU: AS-STARTKIT-BASIC-L1L2-NH-03

211,00€

Availability: In stock

	2 years worldwide warranty
	We ship from Spain. Expected delivery to : November 7 - November 11
	This product has quantity discounts available:
	<50 units	211,00€
	>=50 units	Contact us for special pricing
	>500 units	Contact us for special pricing
	Got any questions? Contact us! - a real human (not AI) will answer in <24 hours!

Description

This standalone set of dual-band board based on u-blox ZED-F9P + u-blox ANN-MB-00 antenna is everything that you need to achieve centimeter level accuracy and evaluate multiband RTK GNSS technology at the most affordable cost.

To achieve centimeter level accuracy, you will need to connect it to a base station or to an RTK correction service (NTRIP or PointPerfect). You can use it with your smartphone, tablet, laptop or PC.

The kit can be configured as a base or a Rover, supports multi-rover. It is fully compatible with Arduino, STM32 Nucleo, Raspberry Pi, Nvidia Jetson, ROS and Pixhawk / Ardupilot.

More details are available in the Specifications and Documentation tabs.

Good to know:
– This product is recommended if you want to evaluate u-blox ZED-F9P.
– This product has the same RTK performance as u-blox C099-F9P.

Product Change History:
– AS-STARTKIT-BASIC-L1L2-NH-00: pre-production version
– AS-STARTKIT-BASIC-L1L2-NH-01: initial production version
– AS-STARTKIT-BASIC-L1L2-NH-02: improvements on USB connector
– AS-STARTKIT-BASIC-L1L2-NH-03: USB upgraded to USB-C, increased socket power, new LED location, longer SMA for panel mount

Includes:
– 1 simpleRTK2B Budget board (ZED-F9P)
– 1 u-blox GNSS Multiband antenna ANN-MB-00 (IP67) with 5m cable

Specifications

ANN-MB
Antenna element

Supported positioning signal bands:
- GPS: L1, L2
- GLONASS: G1, G2
- BeiDou: B1, B2
- Galileo: E1, E5b
- QZSS: L1, L2
- SBAS: WAAS, EGNOS, MSAS and GAGAN
Frequency range:
- 1559-1606 MHz
- 1197-1249 MHz
Polarization: RHCP
Peak gain: 2.0dBi (without ground plane)
Axial Ratio @ zenith: <3dB
Azimuth Coverage: 360 degrees
Impedance: 50 ohm

Electrical

Supply voltage: 3-5V
Typical supply current @ 3V: 15mA
Average LNA gain: 28dB
Maximum Noise Figure: 3.2dB
Maximum VSWR: 2

Mechanical

Maximum length: 82mm
Weight: 173g
Mounting style: magnetic base or 2x4.5mm holes
Cable length: 5 meters
Connector: SMA male

Environmental

Operating Temperature: -40 to +85°C
Storage Temperature: -40 to +85°C
IP Rating: IP67
RoHS: Yes

ZED-F9P features

Centimeter level precision
- <1cm with a base station up to 35km
- <1cm with NTRIP up to 35km
- <4cm with SSR corrections
- <1.5m in standalone mode
- <0.9m standalone with SBAS coverage
Update rate
- Default: 1Hz
- With maximum performance: up to 10Hz
- With reduced performance: up to 20Hz
Multi band: L1, L2 and E5b support
Multifrequency and Multiconstellation:
- GPS: L1C/A L2C
- GLONASS: L1OF L2OF
- Galileo: E1-B/C E5b
- BeiDou: B1I B2I
- QZSS: L1C/A L2C
- SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN
Start-up times:
- First position fix: 25 seconds (cold), 2 seconds (hot)
- First RTK fix: 35 seconds (cold)
RAW data output in UBX format
Base and Rover functionality
Operating temperature Range: -40 to +85degC
Documentation: RED, RoHS