Shipping to 
and 
Blog
Freshly baked ZED-F9H is now available at our store
Dear followers, After a long wait, finally we have in our warehouse the freshly baked simpleRTK2B boards assembled with u-blox ZED-F9H module = simpleRTK2B-F9H. ZED-F9H
How to connect to the Base station and see the Rover’s position in real time with the Base+Rover Kit
Would you like to be connected with your PC to the Base station, and in addition of seeing the Base´s position, also see real time
How to update the firmware of WiFi NTRIP Master
ArduSimple WiFi NTRIP Master board (aka ESP32 XBee) is in continuous development and new versions with cool new features are being released periodically. In this
Product launch: WiFi NTRIP Master
Dear followers, We are very excited today to make this new product announcement. Not only because we think it’s an excellent accessory for simpleRTK2B, but
Product launch: mPCIe Starter Kit IP67
Dear followers, Low cost high precision RTK GPS/GNSS positioning arrives to your Mini PCI Express platforms, thanks to our new adapter board fully compatible with
RTK GPS/GNSS Multiband Antenna porfolio is now complete
Dear followers, With the launch of the new lightweight helical antenna, we now have an interesting antenna portfolio that tries to meet the requirements of
Product launch: Lightweight Multiband GNSS antenna
Dear followers, During the last months we received many messages saying that current Multiband antennas are too heavy for some applications. And we could not
Did you know… you can add multiple rovers to our LR kit?
With our simpleRTK2B – Starter Kit LR IP67, you will receive a pre-configured base and a pre-configured rover. Would you like to connect multiple rovers
Do you want to become our reseller?
Dear followers, It’s now almost a year since we started this adventure together, and we hope it has been as exciting for you as it
How to connect your simpleRTK2B to a Raspberry Pi
Some users have asked us how can they connect their ArduSimple boards to a Raspberry Pi and we have prepared this guide to show all
Product update: Pixhawk cable set
Dear followers, We have seen that ordering the right cable to connect to your Pixhawk had become a real challenge. And this was not letting
Customer Project: simpleRTK2B 3D printed enclosure
Dear followers, Today we wanted to let you know about the plastic enclosure developed by our customer Jerome. It’s compatible with simpleRTK2B, and with the
