Blog
![How to generate RINEX files with simpleRTK3B cover](https://www.ardusimple.com/wp-content/uploads/2022/02/How-to-generate-RINEX-files-with-simpleRTK3B-cover.jpg)
How to configure simpleRTK3B as static base station
SimpleRTK3B Pro powered by Septentrio Mosaic-X5 can generate and output DGPS and/or RTK corrections in the RTCM and CMR formats, for L1, L2 and L5
![](https://www.ardusimple.com/wp-content/uploads/2022/04/simpleRTK2B_and_simpleRTK3B_small.png)
Disable UART1/UART2 communications
When configuring the 4G NTRIP Master, UART1/UART2 communications (out) need to be disabled.In this quick tutorial we will cover this, for both the simpleRTK2B and
![simpleRTK2B M.2 persp](https://www.ardusimple.com/wp-content/uploads/2021/11/simplertk2b_m2_persp.jpg)
New product: M.2 card with ZED-F9P
It can’t get smaller 🙂 ZED-F9P in M.2 form factor. Bring low cost high precision RTK GNSS to your embedded system with M.2 sockets with this
![](https://www.ardusimple.com/wp-content/uploads/2020/06/ZED-F9P.png)
Configuration Files for ZED-F9P HPG 1.30 firmware
Accelerate your RTK project with our configuration files for ZED-F9P HPG 1.30 firmware.
![](https://www.ardusimple.com/wp-content/uploads/2020/06/ZED-F9P.png)
New ZED-F9P HPG 1.30 firmware
If you are looking for improved positioning performance, it will be difficult for you to notice the difference with the new firmware. ZED-F9P HPG 1.30
![how to connect simpleRTK3B with pinpoint GIS via bluetoot cover](https://www.ardusimple.com/wp-content/uploads/2022/03/how-to-connect-simpleRTK3B-with-pinpoint-GIS-via-bluetoot-cover.jpg)
How to connect simpleRTK3B to Android PinPoint GIS via Bluetooth
The Septentrio PinPoint-GIS app for Android is a powerful geographical information system (GIS) that allows users to collect data, in a straightforward manner, of accurate
![](https://www.ardusimple.com/wp-content/uploads/2018/01/simpleRTK2B.jpg)
simpleRTK2B V1 is now simpleRTK2B Budget: same features, same low price
Every day we have more products and it is getting also more difficult to keep it simple 🙂 For this reason and together with the
![simpleRTK2B Pro](https://www.ardusimple.com/wp-content/uploads/2022/02/simpleRTK2B_Pro.jpg)
New Product: simpleRTK2B Pro
Today we say goodbye to our ZED-F9P simpleRTK2B V3 board to welcome the new simpleRTK2B Pro. We introduced a few improvements to our high end
![](https://www.ardusimple.com/wp-content/uploads/2022/03/AS-ANT3B-CAL-L1256-SMATNC-01-R00.jpg)
3D models in STEP format available for all simpleANT RTK antennas
If you are looking to start your project with ArduSimple L1/L2 or L1/L2/L5 GPS/GNSS RTK multiband antennas, as of today the 3D files in STEP
![](https://www.ardusimple.com/wp-content/uploads/2022/02/rtk_ground_settlement_device.jpg)
Measuring ground settlement before a construction work with centimeter precision
Before a road or other heavy construction is built, the ground needs to settle first. To do this, a heavy layer of sand is placed
![cover for tutorials load antenna calibration file](https://www.ardusimple.com/wp-content/uploads/2023/08/cover-for-Tutorials-1.jpg)
How to load antenna calibration files to simpleRTK3B receivers
Antenna calibration files are used to increase even more the accuracy of GNSS measurements. If you have a double or triple band calibrated antenna, you can use their ANTEX
![How to generate RINEX files with simpleRTK3B cover](https://www.ardusimple.com/wp-content/uploads/2022/02/How-to-generate-RINEX-files-with-simpleRTK3B-cover.jpg)
How to generate RINEX files with simpleRTK3B Pro
Receiver Independent Exchange Format (RINEX) is a data interchange format for raw satellite navigation system data. These files are useful to do PPK (post-processing). In