Blog
![ANN-MB-00](https://www.ardusimple.com/wp-content/uploads/2019/02/ANN-MB-00-1.jpg)
Webstore update: new pricing and u-blox ANN-MB free upgrade extended to all products
Dear customers & followers, The sale campaign is almost finished and it’s time to go back to a new normality. At midnight we will update
![Crazy sale!](https://www.ardusimple.com/wp-content/uploads/2019/05/Artboard-48.png)
Product launch: New Basic Starter Kit IP67 at 199€/unit for limited time
We have decided to upgrade our Basic Starter kit to include by default u-blox ANN-MB antenna: our Basic Starter Kit IP65 becomes Basic Starter Kit
![unbrick ZED-F9P](https://www.ardusimple.com/wp-content/uploads/2019/05/Sense-títol.png)
simpleRTK2B hack #3: the definitive guide to fix bricked ZED-F9P
Use case: U-center is not recognizing simpleRTK2B USB (aka the ZED-F9P is bricked) and hack #2 is not working. This case is rare but can
![](https://www.ardusimple.com/wp-content/uploads/2019/03/in_stock_.png)
“In stock“
Hello backers, followers & customers, Today it’s a very special day for us. After many sleepless nights and our wives close to divorce, we can
![Production](https://www.ardusimple.com/wp-content/uploads/2019/03/production-Copy.jpg)
Closed for production
Hi there, Production week has finally arrived. All our team is 100% focused on production and shipment preparation until the 31st of March. We will
![Unbrick ZED-F9P](https://www.ardusimple.com/wp-content/uploads/2019/03/unbrick_simpleRTK2B.png)
simpleRTK2B hack #2: unbrick ZED-F9P / use UART1 via USB
Use case 1: U-center is not recognizing simpleRTK2B USB (aka the ZED-F9P is bricked) for any of the following reasons: – Failure uploading the firmware
![simpleRTK2B hack 1](https://www.ardusimple.com/wp-content/uploads/2019/03/xbee_socket_hack.png)
simpleRTK2B hack #1: unleash the double USB power of simpleRTK2B
Use case: Customer has a computer (with Internet) and needs to connect the simpleRTK2B to a NTRIP service to get cm level accuracy and also
![simpleRTK2B v1.1](https://www.ardusimple.com/wp-content/uploads/2019/03/simpleRTK2B-v1.1@0.5x.png)
Product update: simpleRTK2B v1.1 facelift and getting ready for mass production
Dear backers & followers, Today we would like to make 2 announcements: simpleRTK2B is getting a facelift: the simpleRTK2B v1.1. The new version will replace
![Ardusimple MWC](https://www.ardusimple.com/wp-content/uploads/2019/02/MWC_Logo_RGB_No-Date.png)
Meet the Ardusimple team at MWC in Barcelona, 28 February
We will attend the Mobile World Congress in Barcelona, on the 28th of February. We don’t have a stand but we will bring our products
![](https://www.ardusimple.com/wp-content/uploads/2019/02/production.jpg)
February 4: General update
Dear backers and followers, A few of you have mentioned that you miss the updates we were giving during the Kickstarter campaign. We have therefore
Product update: MR & LR Through Hole XBee radios available in store
The simpleRTK2B board is compatible with any XBee-compatible radio module. We have made available in our store the radios included in our MR & LR
![AS+Ks finish line](https://www.ardusimple.com/wp-content/uploads/2019/01/finish_line.png)
Kickstarter campaign update: 100% orders shipped
Dear backers and followers, We are excited to tell you that today, the courier picked up the last orders from the Kickstarter campaign for delivery.