Vanis RTK Calibrated Surveyor Kit

With the Vanis RTK Calibrated Surveyor Kit you will have everything you need to start your surveying tasks with RTK and centimeter level accuracy.
You can use your preferred iOS/Android app to power and connect to the simpleRTK2Blite receiver via USB OTG (type C or microB) or by Bluetooth/BLE.

You will only need to configure your NTRIP credentials and you are ready to go!

Good to know:
– Produced in the EU for Vanis d.o.o.
– You can power and connect to the GNSS receiver with only one USB OTG cable
– You can use Bluetooth and BLE with the same device (compatible with Android and iOS devices)
– Fits any smartphone from 5.3cm to 9.3cm with or without case
– You can also use a tablet with this kit (tablet holder not included)
– Smarpthone is not included

“Vanis RTK Calibrated Surveyor Kit items” includes:
– ZED-F9P RTK receiver with USB and Bluetooth/BLE inside a plastic case
– Survey calibrated antenna with 1.5m TNC-SMA cable
– USB-C cable
– USB OTG microUSB-B (14cm)
– USB OTG type C (22cm)
– Universal smartphone holder with 3M-Backed Rubber Pads, fits any smartphone from 5.3cm to 9.3cm with or without case
– Clamp to hold the smartphone holder to the pole
– Velcro strap (20cm) to fix the receiver to the back of the smartphone holder
– Pre-configuration to send NMEA over Bluetooth/BLE and USB at the same time
– Plastic case has a LED to indicate Bluetooth/BLE status

“Pole for survey GNSS antenna” includes:
– Surveying pole