and 
Calibrated Survey Tripleband GNSS Antenna
NGS certified geodetic performance.
 |
2 years worldwide warranty | |
 |
We ship from Spain. Expected delivery to
:
| |
 |
This product has quantity discounts available: | |
| <50 units | 199,00€ | |
| >=50 units | 152,00€ Click here for bulk orders | |
| >500 units | Contact us for special pricing | |
 |
Got any questions? Contact us! - a real human (not AI) will answer in <24 hours! | |
Calibrated by NGS Survey Quadband (L1/L2/L5/L6) GNSS antenna with 1.5m rugged cable with TNC to SMA connector and 2.5m rugged cable with TNC to TNC connector.
Ideal for surveying applications including real time RTK, PPK, post-processing, but also for receivers supporting L-band.
Good to know:
– Compatible with all ArduSimple GNSS and RTK boards as well as any other multiband GNSS receiver in the market.
– Shockproof gel ring at the perimeter of the antenna to reduce damage in case of fall
– Antenna calibration files can be downloaded from NGS website (Manufacturer: ArduSimple, Model: AS-ANT3B-CAL-01): https://www.ngs.noaa.gov/ANTCAL/index.xhtml#
– This product is a cheaper alternative to Trimble Zephyr, AG15, AG25, Novatel Vexxis antennas, or Holybro HANT-X627A.
Includes:
– Calibrated Survey GNSS Tripleband + L-band antenna (IP67)
– 1.5m pigtail cable with TNC to SMA connector
– 2.5m pigtail cable with TNC to TNC connector
Antenna element
- Supported positioning signal bands:
- GPS: L1, L2, L5, L6
- GLONASS: G1, G2, G3
- BeiDou: B1, B2, B3
- Galileo: E1, E5, E6
- QZSS: L1, L2
- Navic: L5
- L-band: L6
- SBAS: WAAS, EGNOS, MSAS and GAGAN
- Polarization: RHCP
- Peak gain: 5.5dBi
- Axial Ratio @ zenith: <3dB
- Azimuth Coverage: 360 degrees
- Impedance: 50 ohm
- Phase center error: ±1mm
- Calibration file available
- Supply voltage: 3-12V
- Typical supply current @ 3V: 50mA
- Average LNA gain: 40dB
- Maximum Noise Figure: 1.5dB
- Maximum VSWR: 2
- Maximum length: 152mm
- Weight: 410g
- Mounting style: Magnetic base (requires accessory) or 5/8” x 11TPI thread
- Connector: TNC female
- Cable length:
- Includes 1.5 meter cable terminated in SMA male
- Includes 2.5 meter cable terminated in TNC male
- Operating Temperature: -40 to +85°C
- Storage Temperature: -40 to +85°C
- IP Rating: IP67 (excluding air vent in screw hole, which can be sealed when installed)
- RoHS: Yes
