and 
Sparkfun Lora Kit Wiring to RTK2B Lite
vic2474 asked 4 months ago
Hi guys what is the best way to connect a RTK2Blite to a Sparkfun Lora Serial Kit https://www.sparkfun.com/products/20029
I have 2 RTK2B Lite one as a base and one on the tractor setup with Agopengps
I have 2 RTK2B Lite one as a base and one on the tractor setup with Agopengps
Please login or Register to submit your answer
replied 4 months ago
Suggest you draw some diagrams and review related docs
https://www.ardusimple.com/simplertk2blite-hookup-guide/#hw_overview
Suggested Serial Connectivity
TOP-SIDE-XBEE-2 = ZED-UART2-RX = LORA-SERIAL-TXD
TOP-SIDE-XBEE-3 = ZED-UART2-TX = LORA-SERIAL-RXD
TOP-SIDE-XBEE-10 = GND = LORA-SERIAL-GND
Figure your 3.3V and 5V supplies
Perhaps initially work with the radios, establish a working link, configure so that you get a transparent transport of data end-to-end.
The ZED-F9P would prefer you use UART2 for the RTCM3 data, unless you plan on having some other MCU board act as an intermediary.
replied 4 months ago
Ok thanks Ill try it