If from U-CENTER I run View / Configuration View / Sbas and on the ‘Subsystem’ combobox I put ‘Disabled’, after sending the command by pressing ‘Send’ on bottom of window, the setting returns to be Enabled
The question is: what is the correct procedure to disable the Sbas system from the functions used by the GPS receiver?
Firmware f9p = 1.13
You should be using the Series 9 configuration methods.
I think the alternate way is to disable via UBX-CFG-GNSS
See View – > Generation 9 Configuration View -> GNSS Configuration
Via Advanced Configuration
Ok, now via
View – > Generation 9 Configuration View -> GNSS Configuration