Is there any experience connecting the simpleRTK2B to a RUT955 LTE Router with NTRIP, or is there any recommendation?
Thanks in advance.
Plug SimpleRTK2B shield into this: https://store.arduino.cc/usa/arduino-yun-rev-2
Plug ethernet cable into LAN (not WAN) port of RUT955.
Write arduino sketch to pull ntrip data from RUT955 wireless link and feed to serial 2 on arduino.
I am not sure if this would work but it looks like a possible approach.
jberezin ‘s comment is a good suggestion. Or you can also use ESPrtk with Ardusimple. This is a comprehensive and low cost connection solution, it also supports Ethernet – WIFI – Bluetooth – NTRIP (Client / Server) – MQTT (Client / Server)., OLED Display, SD Card to log NMEA., F9P Configure (U-Center) ..