How to understand if the SimpleRTK2B card is receiving the flow of the rtcm corrections?

Q&A forumCategory: QuestionsHow to understand if the SimpleRTK2B card is receiving the flow of the rtcm corrections?
amorosik asked 2 years ago

I am using a Teltonika RUT955 router inside which there is a Ntrip client, connected to query an Ntrip server via internet, and to send data on the router’s rs232 serial port
The router rs232 port transmits the data related to the rtcm corrections on the uart2 of the SimpleRTK2B card (through voltage level adapter)
Using the U-Center software connected to the SimpleRTK2B receiver, is it possible to understand if the card is receiving the flow of the rtcm corrections?

4 Answers
apt1506 answered 2 years ago

Yes, check output from view > messages > ubx > nav > sig (and/or sat)…

apt1506 answered 2 years ago

ardusimple connected with ublox droid center over uart1 bluetooth, being fed rtcm corrections. A TCP connection has been established b/w ublox droid center and u-center to show which corrections are being used

apt1506 replied 2 years ago

larger image

apt1506 answered 2 years ago

larger image
original image

Ardusimple Staff answered 2 years ago

If it helps, you can also check with ubx-rxm-rtcm