Buen día, disculpen alguien sabe como actualizar o cambiar el firmware del XBee SX? estoy tratando con el XCTU y conectado a la RTK2B por el puerto del XBee pero me da error.
Se agradece su tiempo
Hi Omar,
Thanks for your question.
We recommend not updating the firmware on the radios. The features of the newer firmware are not used in the rtk use case. In addition your radios will lose the pre-configuration when doing the update.
May we ask why are you trying to update the firmware?
Hola, gracias por la respuesta.
Estoy investigando un poco mas el uso de los xbee, es un herramienta con mucho potencial. Sobre todo en el modo API, MESH, etc. Tengo muy poco conocimiento sobre la electrónica y ese tipo de cosas pero estoy haciendo el esfuerzo. me enseñaron un poco del Xbee pero de la familia Xbee 2SC, pensé que podía leer los datos desde una pc.
Seguiré investigando 🙂
For this type of experimentation I’d strongly recommend getting one of the USB-to-XBee dongle devices so you can talk too and configure them without signals from the ZED-F9P bleeding thru.
You can also test/experiment with the link in a PC-to-PC configuration, to better understand what is going on, and to debug connectivity issues.
This website uses cookies so that you have the best user experience. If you continue browsing you are giving your consent for the acceptance of the aforementioned cookies and the acceptance of our cookies policy. Click on the link for more information.Ok
Hi Omar,
Thanks for your question.
We recommend not updating the firmware on the radios. The features of the newer firmware are not used in the rtk use case. In addition your radios will lose the pre-configuration when doing the update.
May we ask why are you trying to update the firmware?
Hola, gracias por la respuesta.
Estoy investigando un poco mas el uso de los xbee, es un herramienta con mucho potencial. Sobre todo en el modo API, MESH, etc. Tengo muy poco conocimiento sobre la electrónica y ese tipo de cosas pero estoy haciendo el esfuerzo. me enseñaron un poco del Xbee pero de la familia Xbee 2SC, pensé que podía leer los datos desde una pc.
Seguiré investigando 🙂
For this type of experimentation I’d strongly recommend getting one of the USB-to-XBee dongle devices so you can talk too and configure them without signals from the ZED-F9P bleeding thru.
You can also test/experiment with the link in a PC-to-PC configuration, to better understand what is going on, and to debug connectivity issues.