DWQA User Profile Nick GamrothQuestions(1)Answers(0)Posts(0)CommentsVery strange, but I left the system alone for a few days and it appears to be working when I came back to it. Not really sure how that's possible. Maybe I had some unsaved settings that were causing problems.I'm still using 1.32. Should have mentioned that I ignored the warning about the settings file being for an older version of firmware.One thing I may be misunderstanding about this device is whether or not I need external RTCM data. When I start the boards up, the rover board "No RTK" LED shuts off after a bit and I start seeing what looks like correct data on UBX-NAV-RELPOSNED. This is without the u-center NTRIP client running or any other NTRIP client connected.On simpleRTK2B+heading not communicatingThe antennas are 2.5m apart and mounted on steel plates. I'm testing in a wide open parking lot. I think the view of the sky is OK because I get fixed rtk from both boards if I feed them both ntrip data.Should I see the no rtk LED turn off on the rover if it's communicating with the base board? I would expect it to get the same corrections if everything is configured properly. On simpleRTK2B+heading not communicatingCrop
and 
