Our set of 10 UAV ground control points are cost-effective targets for your drone survey project. Whether you are doing photogrammetric or LiDAR 3D surveying, these GCPs have a clear center mark and four holes in the corners so you can anchor it to the ground.
New product: Ground Control Points (GCP) for drones Read More »
As simple as that. Do you have any XBee compatible plugin board and want to connect it to your Pixhawk autopilot via JST connector serial port? Now you can do it with the JST Carrier Board for XBee Plugins from ArduSimple
New product: JST Carrier Board for XBee Plugins Read More »
Need to connect one GNSS antenna to multiple receivers? Our new 1-to-4 GPS/GNSS Antenna Signal Splitter lets you connect up to 4 receivers to a single antenna – no external power needed! This is an ideal solution if you want to: Compare up to 4 different GNSS receivers under the same conditions Test the same
New product: 1-to-4 GPS/GNSS Antenna Signal Splitter Read More »
It was 2018 when u-blox launched ZED-F9P, the RTK module that revolutionized the high precision market, and at ArduSimple we launched the first ZED-F9P evaluation board, the simpleRTK2B. 7 years later here we are with the next generation: simpleRTK4 Optimum powered by u-blox ZED-X20P. Higher update rate (25Hz), full band (L1 L2 L5 L6), and
New product: simpleRTK4 Optimum with u-blox ZED-X20P Read More »
If you need high-precision GNSS, you’ve probably come across the u-blox ZED-F9P and ZED-X20P modules. Both offer centimeter-level accuracy, but they offer different features for different users. Here’s a quick breakdown:
Comparison of u-blox ZED-F9P and ZED-X20P Read More »
If you’re looking for a high-precision GNSS receiver, you’ve probably read the terms All-band, Quad-band, and Triple-band. Is there actually any difference? At ArduSimple we like to keep things simple, let’s use this short article to clear up this confusion. Triple-band vs. Quad-band vs. All-band RTK receivers: the real story We are sorry we need
All-band vs. Quad-band vs. Triple-band: What’s the real difference? Read More »
We have permanently reduced the prices for all our products containing the u-blox ZED-F9P module! This decision is part of our commitment to making RTK technology more accessible and affordable for everyone. The boards powered by the ZED-F9P are the perfect choice for mass market applications such as precision farming, surveying and mapping, DIY drones,
New permanent lower price for ZED-F9P boards Read More »
While everyone’s offering Black Friday discounts, we’re offering the tools you actually need — GNSS RTK kits at up to 25% off and Free shipping with one of these products in the Cart. Centimeter accurate equipment, real savings, no gimmicks — now through December 4. Please note, free shipping offer does not apply to orders
Black Friday deals! Up to 25% Off selected GNSS Products Read More »
Achieving centimeter-level GNSS accuracy? It’s all about choosing the right method—Real-Time Kinematic (RTK) or Post-Processed Kinematic (PPK). Our new video dives into the technical differences to help you decide which is best for your project. We’ll look at distance limits, error detection, setup time, and data post-processing requirements. Discover why RTK has a 35 km limit
The differences between RTK and PPK. Which method is best for your use cases? Read More »
With the kids back in school, now’s the perfect time to kickstart your GNSS project! To get you started quickly and affordably, we’re excited to introduce partnership with Unicore Communication, a leader in GNSS integrated circuit design. As part of this collaboration, we’re introducing new additions to our simpleRTK3B series—boards featuring the UM980, UM981, and
New products: Unicore UM980, UM981, UM982 tripleband RTK receivers Read More »
The vision of ArduSimple is to make GNSS RTK technology simple, affordable and accessible to everyone with a series of starter kits, tutorials, engineering services and OEM products.
Subscribe to our newsletter to get the latest updates:
Shipping to 
and 
