 | 2 years worldwide warranty | |
 | We ship from Spain. Expected delivery to : | |
 | This product has quantity discounts available: | |
| <50 units | 15,00€ | |
| >=50 units | Contact us for special pricing | |
| >500 units | Contact us for special pricing | |
 | Got any questions? Contact us! - a real human (not AI) will answer in <24 hours! | |
On one side USB to connect to your PC, on the other side JST-GH 6pin to connect to your ArduSimple board. Useful to:
– Recover ZED-F9P boards with deleted firmware or disabled native USB interface.
– Have a second USB interface on your ArduSimple board
– Connect u-center and another software (like RTKLIB) at the same time.
Alternatively, you can use this cable to configure any 6-pin Pixhawk peripheral that you have (like GPS, telemetry unit, etc). Don’t connect this cable to a Pixhawk autopilot, as both Pixhawk and the cable will try to give power to each other.
This product is like a TTL to USB adapter (or FTDI to USB adapter), but ready to plug onto our board instead of soldering cables.
Good to know:
– Only VCC, GND, TX and RX are connected to FTDI. I2C is not available.
Includes:
– 1 x USB to JST-GH 6 pin cable (0.5 meter)
The vision of ArduSimple is to make GNSS RTK technology simple, affordable and accessible to everyone with a series of starter kits, tutorials, engineering services and OEM products.
You can always contact us at info@ardusimple.com
Subscribe to our newsletter to get the latest updates:
Want to learn more about GPS and RTK?
If you are busy right now, our engineers can send you 3 short e-mails, explaining all you need to know to start your project.
and 
