RTK in 5-minutes
ZED-F9P
Do you want to learn in 5 minutes how to upgrade your laptop, tablet or mobile phone to have centimeter precision? You are in the right place.
There are 3 ways of getting centimeter level position. Which one is for you?
A. With access to correction service via internet (also called NTRIP)
Most countries have deployed RTK networks to support surveyors in the territory, sometimes for free. Some users publish their base stations online for free. Ultimately you can get a paid subscription from an NTRIP Service Provider.
B. A base station and a rover working together (up to 35km from each other)
If you want to be completely independent from services, you can decide to install your own base station. This will allow you to travel with the rover within a 35km range from it.
C. RTK Receiver with integrated correction service subscription
If option A and B are not for you, or you find them too complicated, there is an option of getting a RTK receiver with integrated RTK-SSR correction service subscription. We take care of everything, literally just plug and start enjoying centimeter level precision.
A. I have access to RTK Correction Service (NTRIP)
If this is your case, you only need one RTK Board and one RTK Antenna.
If you are a DIY user or you would like to go for the minimum, the simpleRTK2B – Basic Starter Kit is the product for you.
If on the other hand you prefer to receive the electronics inside a box or you want to resell RTK receivers under your own brand, you might prefer to check out our Professional Sets, where the most affordable is the RTK Portable Bluetooth Kit.
Once you receive the material and you have your NTRIP username and password, you just need to follow one of these tutorials:
B. I want to install my own base station
If you don’t have access to correction services or you simply want to be independent from them, a Base+Rover setup might be the way to go. The “Base Station” will have to be installed in a static location performing measurements of the GNSS errors, while the “Rover” can be travelling around enjoying centimeter level accuracy. There is a limitation and is that both Base and Rover need to see more or less the same satellites, for this reason the maximum range of this solution is around 35km.
For units which are very close to each other (up to 10 meters), we can use cables to connect them. To cover longer distances we will need a wireless communication. For this reason we added a socket (we call it XBee socket) to our RTK receivers, so adding wired or wireless communication between base and rover would be an almost plug-and-play task.
To make it even simpler, we developed a few starter kits for this setup:
- Up to 10 meters between base and rover, you can do with 2x Basic Starter Kits or the simpleRTK2B+heading Basic Starter Kit. The GNSS antennas included in the kit have 5 meter cables. Additionally you can extend this distance to up to 20 meters (10 meters each side) by adding our low loss RF cables.
- Up to few hundred meters, 1x Medium Range (MR) kit. This kit only allows one Rover for each Base Station.
- Up to few kilometers, 1x Long Range (LR) kit with multirover capability.
- Up to 50 kilometers, 1x eXtra Long Range (XLR) kit also with multirover capability.
C. Receivers with integrated RTK-SSR corrections
Traditionally having access to RTK-SSR technology was complex and only available for large companies buying thousands of units. For this reason at ArduSimple we decided to launch simpleSSR receiver to make this technology available to everyone.
simpleSSR products remove the hassle of installing a Base Station or getting a contract for an RTK correction service, and enable literally plug and play RTK: just power the RTK receiver with simpleSSR accessory, wait 1-2 minutes and enjoy centimeter level accuracy in all the coverage area.
-
RTK-SSR products
simpleSSR – Starter Kit incl. 1 year unlimited RTK corrections
USD $918.85 Select options
Do you want to learn more? Checkout our RTK in detail page.
Or do you have questions? Just contact us, we always answer.
Subscribe to get updates!