and 
ArduSimple’s vision is to make GNSS RTK technology simple, affordable and accessible to everyone with a series of starter kits, tutorials, engineering services and OEM products.
Pixhawk cable set
13,00€
Availability: In stock
This product comes with 2 years worldwide warranty
Includes:
– 1 x 15cm cable with 6 pin JST-GH + 6 pin DF13 male connectors compatible with Pixhawk 1 autopilot
– 1 x 15cm cable with 6 pin JST-GH male connectors on both ends compatible with Pixhawk 2.1 (Cube) autopilot
– 1 x 15cm cable with 6 pin JST-GH male connectors on both ends compatible with Pixhawk 4 autopilot
Cable to connect simpleRTK2B and simpleRTK2Blite to the most common Pixhawk autopilots.
The cable length is 15cm and has JST-GH and DF13 6 pin male connectors.
This kit contains 3 different cables and is compatible (at least) with the following Pixhawk models:
Be aware that some clones may have different connectors, we can only guarantee compatibility with the original Pixhawk models.
The red wire may NOT be pin #1 (+Ve) – please carefully check the pin numbers printed on the PCB and do not rely on wire colors.
Documentation
Related tutorials:- How to connect simpleRTK2B Heading to ArduPilot with external RTK corrections?
- How to send RTK base station corrections to ArduPilot with Mission Planner, QGroundControl and MAVProxy
- How to send NTRIP corrections to ArduPilot with MissionPlanner, QGroundControl and MAVProxy
- How to configure simpleRTK2B Heading – Basic Starter Kit and connect it to ArduPilot
- How to configure triple-band Septentrio GNSS receiver and connect it to ArduPilot
